Security Secure Seal® SS, SSD, SSID, and Flex

Quick and easy installation for special-gas applications with quality and dependability.

Suited for Categories I, II, III and IV; and listed for Type BH gas vent applications for appliances with a rated operating flue temperature up to 480°F (248°C). Options include single-wall, double-wall, and insulated double-wall venting for cold climates all made using corrosion-resistant AL29-4C® stainless steel inners. Secure Seal is ideal for gas-fired condensing appliances including high-efficiency boilers, furnaces, booster heaters, pool heaters, water heaters, unit heaters, and tankless water heaters.

The Secure Seal system is the complete commercial package for modern venting and reliability. Installers can assemble the system effortlessly with confidently thanks to a patented coupling system and self-sealing Viton O-ring gaskets. In addition, a flexible version of Secure Seal is offered for masonry relining applications. Even better, Secure Seal Flex features a smooth inner-wall made using super-ferritic stainless that provides for no output reduction.

http://securitychimneys.com/secure-seal-ss-ssd-ssid-and-flex

FasNSeal®

DuraVent FasNSeal single-wall and FasNSeal W2 double-wall AL29-4C is the original stainless steel special gas venting system developed by PROTECH. FasNSeal is approved for use on a wide variety of natural gas or propane Category II, III, and IV appliances or Canada’s Type BH Gas Vent Systems.

All FasNSeal vent lengths and components feature a patented built-in mechanical locking band and triple-lipped directional gaskets for ease of installation. Available in diameters from 3″ up to 24″.

With FasNSeal W2 double-wall, a ½” air space between the inner and outer walls helps to reduce clearance to combustibles and creates a heat shield for additional safety where MAN-SAFE policies may apply.

FasNSeal® Flex

DuraVent FasNSeal Flex is made from super-ferritic stainless steel. It features a smooth inner-wall to optimize gas flow, minimize back-pressure, facilitate better condensate management, and to make cleaning easier. FasNSeal Flex is the only flexible chimney liner approved to both ULC-S636 and UL 1738. It also meets the UL 1777 standard.

http://www.duravent.com/ProductCategory.aspx?c=48

DuraVent PolyPro® is a chloride-free, fully engineered venting system designed for use with high-efficiency furnaces, condensing boilers, tankless water heaters, and other approved heating appliances.

PolyPro is available in rigid or flexible pipe formats in a wide variety of common diameters. We also offer PolyPro concentric venting for use on select condensing appliances.

http://www.duravent.com/Product.aspx?hProduct=21

Security Secure Stack® CIX and CAX

Factory-built positive pressure chimney for boiler breaching, diesel engine generators, pressurized chimney stack (pressure-stack), and grease duct applications.

This system features an installer-friendly self-centering design. This not only simplifies assembly, it also dramatically speeds up installation. Secure Stack is available in insulated or air-cooled versions with a choice of inner flue and outer jacket materials to match the specific needs of each application.

Suitable for use up to a maximum of 60 inches water column, Secure Stack is tested and approved to ULC/ORD C959and ULC S604 standards.

http://securitychimneys.com/cixcax-secure-stack

DuraVent DuraStack is a factory-built positive pressure chimney system for boiler breaching, diesel engine generators, pressurized chimney stack (pressure-stack), and grease duct applications.

This system features an installer-friendly self-centering design. This not only simplifies assembly, it also dramatically speeds up installation. DuraStack is available in insulated or air-cooled versions with a choice of inner flue and outer jacket materials to match the specific needs of each application.

Suitable for use up to a maximum of 60 inches water column, DuraStack is tested and approved to ULC/ORD C959and ULC S604 standards.

http://www.duravent.com/Product.aspx?hProduct=29

Security CT® Liner

Premium rigid stainless steel liner system for multiple applications including horizontal breeching.

Specially designed for easy installation and optimal performance with today’s new generation of high-efficiency appliances. It can be used as a replacement liner in a masonry chimney, a flue pipe within a masonry structure, or for horizontal breeching of boiler flues. CT is suited for use with gas, oil, or solid-fuel appliances, and is tested up to 60” water column for positive-pressure systems.

Available in 5″ through 24″ inside diameters. Tested and listed to ULC-S635M, ULC-S640M, and UL-1777

http://securitychimneys.com/ct/

Security Secure Stack® CIX and CAX

Factory-built positive pressure chimney for boiler breaching, diesel engine generators, pressurized chimney stack (pressure-stack), and grease duct applications.

This system features an installer-friendly self-centering design. This not only simplifies assembly, it also dramatically speeds up installation. Secure Stack is available in insulated or air-cooled versions with a choice of inner flue and outer jacket materials to match the specific needs of each application.
Suitable for use up to a maximum of 60 inches water column, Secure Stack is tested and approved to ULC/ORD C959and ULC S604 standards.

http://securitychimneys.com/cixcax-secure-stack

DuraVent’s innovative factory-built grease duct design is ideal for new restaurant construction and custom remodeling projects.

Aside from assembling faster using common tools, this listed, certified system is also designed to make inspection and servicing (cleaning) simple.

Available in 5″ up to 36″ diameters in your choice of wall thicknesses and metal inner & outer shell materials to suit each application perfectly.

http://www.duravent.com/Product.aspx?hProduct=29

SECURE TEMP® S2100+ Multi-Fuel Chimney

Insulated double-wall chimney suited for multiple fuel types.

A precision-engineered multi-fuel, double-wall, Type-A vent, insulated chimney system. Available with a 304 stainless steel inner flue and your choice of either a 430 stainless steel or Galvalume outer casing. Sections twist-lock together at joints for easy installation in new construction or retrofit applications. With its 2” insulated wall, CI is ideal for use in colder climates. It is available in 12″ through 24″ inside diameters.

Tested and listed to ULC-S604, ULC/ORD-C959, UL-103 and UL-103HT

http://securitychimneys.com

DuraTech® is a twist-lock vent system for use with oil & gas-fired appliances listed with a Type A Chimney in Canada. No locking bands or mechanical fasteners are required.

This insulated chimney system is also for use with select factory-built wood-burning fireplaces. Designed for normal, continuous operation at 1000°F flue gas temperatures, DuraTech features a one-inch thick ceramic refractory blanket insulation encased between inner and outer stainless walls. Stainless steel caps seal the pipe at each end.

Available in sizes 5″ to 8″, and 10″ up to 24″. c-UL-us Listed to UL 103 HT and to ULC S604 (MH7399).


http://www.duravent.com/Product.aspx?hProduct=1


http://www.duravent.com/Product.aspx?hProduct=20

• Suscon Industrial custom engineered free standing, guy supported and laterally supported exhaust stacks available for various industrial applications such as power plants, heating plants, waste incineration and diesel engine exhaust purposes, available in up to 3000° F continuous flue temperature.